PRODUCT DESCRIPTION 

STONE GRIP^TM is a combination Slip Resistant Floor Treatment & Polish Preserver formulated for Marble, Granite, Terrazzo, Slate, and other stone floor surfaces. It is used diluted to increase the coefficient of friction of the floor surface thereby reducing the potential for slip and fall accidents and to keep floor looking beautiful. STONE GRIP may be applied with an auto scrubber or the product may be applied by a mop and bucket system. For best results buff or burnish after application. Effective over sealed or unsealed stone floor surfaces. Excellent for use on floors in stores, shopping malls, office buildings, homes, banks, schools, universities and anywhere that slip and fall accidents are a problem. 

TREATMENT DIRECTIONS: 

Sweep floors prior to use. For heavily soiled surfaces preclean floor with N.A.C cleaner. For lightly soiled floors follow directions below. 

FOR USE IN AUTOSCRUBBERS 

Use 16 oz. STONE GRIP per gallon of cold water and red or blue pad (in hard water areas use 20 oz. per gallon of cold water). STONE GRIP has foam control. Allow to dry. For best results burnish floor; high speed burnish with burnish pad or burnish brush; with standard speed machine use red or white pad. 

FOR USE WITH A MOP AND BUCKET 

Mix 8 oz. STONE GRIP per gallon of cold water and apply with mop. Allow to dry. For best results burnish floor; high speed burnish or burnish brush; with standard speed machine use red or white pad. 

FOR SPRAY BUFFING 

Mix 12 oz. STONE GRIP per gallon of cold water and apply with a trigger sprayer while spray buffing floor surface. 

NOTE: Due to the variety of pad types and densities, experiment with different pads to find one that produces the best results. For floor stripping, use STONE STRIP"" stone floor stripper. 

FOR BEST RESULTS 

Use STONE GRIP regularly as a treatment solution. 

Use of cold water will extend finish life if acrylic sealer or finish is used on the floor. Do not use a clear final rinse 

Do not mix with other chemicals