DIRECTIONS FOR USE:        TRACTION^TM

For Burnishing I Gloss Restoration I Safety Treatment: 

Mix 8 oz of TRACTION™ per gallon of cold water. Mop in a wet even coat and allow to dry. Buff entire area. For spray buffing, mix 1 part TRACTION™ to 10 parts cold water and apply with trigger sprayer. Use high speed or standard speed equipment. 

For General DamD MODDing: 

Mix 4 oz of TRACTION™ per gallon of cold water and apply with a mop. This product is self-neutralizing and requires no clear water rinse. If rinsing is desired, use TRACTION^TM diluted 4 oz per gallon of cold water. 

For Use in Automatic Scrubbers: 

For surface cleaning, use 2 oz per gallon of cold water and red buff pad. TRACTION™ has foam control. For heavy scrubbing, use 4 oz per gallon of cold water. 

For Heavily Soiled or Greasy Floors: 

Mix 8 oz of TRACTION™ per gallon of cold water. If necessary mop or scrub twice with TRACTIONTM. 

FOR BEST RESULTS: 

V' Use TRACTIONTM regularly as a mopping solution. 

V' Use of cold water will extend finish life. 

V' Do not use a final clear water rinse. 

V' Do not mix with other chemicals.